Alloy Strip Products

Clingan Steel specializes in alloy strip products such as 4130, 5150, 10B38.

Below is a table of common alloy grades available through Clingan.

AISI or SAE #	C	Mn	Cr	Ni	Mo	V
4118	.18/.23	.70/.90	.40/.60	..........	.08/.15	..........
4130	.28/.33	.40/.60	.80/1.10	..........	.15/.25	..........
4131	.28/.33	.50/.70	.90/1.20	..........	.15/.25	..........
4137	.35/.40	.70/.90	.80/1.10	..........	.15/.25	..........
4140	.38/.43	.75/1.00	.80/1.10	..........	.15/.25	..........
4142	.40/.45	.75/1.00	.80/1.10	..........	.15/.25	..........
4145	.43/.48	.75/1.00	.80/1.10	..........	.15/.25	..........
4147	.45/.50	.75/1.00	.80/1.10	..........	.15/.25	..........
4150	.48/.53	.75/1.00	.80/1.10	..........	.15/.25	..........
4320	.17/.22	.45/ .65	.40/.60	1.65/2.0	.20/.30	..........
4340	.38/.43	.60/.80	.70/.90	1.65/2.0	.20/.30	..........
4620	.17/.22	.45/.65	.........	1.65/2.0	.20/.30	..........
4720	.17/.22	.50/.70	.35/.55	.90/1.20	.15/.25	..........
4815	.13/.18	.40/.60	.........	3.25/3.75	.20/.30	.........
4820	.18/.23	.50/.70	.........	3.25/3.75	.20/.30	.........
50B46*	.44/.49	.75/1.00	.20/.35	..........	..........	..........
5120	.17/.22	.70/.90	.70/.90	..........	..........	..........
5130	.28/.33	.70/.90	.80/1.10	..........	..........	..........
5132	.30/.35	.60/.80	.75/1.00	..........	..........	..........
5140	.38/.43	.70/.90	.70/.90	..........	..........	..........
5150	.48/.53	.70/.90	.70/.90	..........	..........	..........
5160	.56/.64	.75/1.00	.70/.90	..........	..........	..........
51B60*	.56/.64	.75/1.00	.70/.90	..........	..........	..........
51100	.98/1.10	.25/.45	.90/1.15	..........	..........	..........
52100	.98/1.10	.25/.45	1.30/1.60	..........	..........	..........
6118	.16/.21	.50/.70	.80/1.10	..........	..........	.10/.15
6150	.48/.53	.70/.90	.80/1.10	..........	..........	.15 min
8615	.13/.18	.70/.90	.40/.60	.40/.70	.15/.25	..........
8617	.15/.20	.70/.90	.40/.60	.40/.70	.15/.25	..........
8620	.18/.23	.70/.90	.40/.60	.40/.70	.15/.25	..........
8622	.20/.25	.70/.90	.40/.60	.40/.70	.15/.25	..........
8630	.28/.33	.70/.90	.40/.60	.40/.70	.15/.25	..........
8637	.35/.40	.75/1.00	.40/.60	.40/.70	.15/.25	..........
8640	.38/.43	.75/1.00	.40/.60	.40/.70	.15/.25	..........
8645	.43/.48	.75/1.00	.40/.60	.40/.70	.15/.25	........

Typical Hardness Limits
Annealed	B85 Max
As Rolled	B90-102
* Special Hardness Available