With skiving equipment, specialized rolling, slitting and oscillate winding equipment, and an extremely broad based inventory of C1074, C1050, 301, 302, 304, 430, low carbon, and other grades stocked, we are uniquely positioned to fill large and small orders on an immediate basis.
Clingan Steel's 6 precision slitting lines are capable of slitting light gauge stainless, copper, brass, aluminum steel and high carbon strip from .006" to .250 thick and from .125" to 48" wide. Toll processing is available.
Clingan Steel's oscillate slitting line is capable of slitting from .017" to .250" thick. The oscillate slitting line incorporates in-line strip deburring while producing coils upto 3000 lbs. Toll oscillate slitting and deburring is available
Clingan’s edging equipment can produce numbers 1 & 4 round, 1, 5 & 6 square, deburred & custom edges. This process also, removes camber, twist and coil set. End product can be cut to length or recoils in either ribbon or oscillate wound coils.
We produce cut to length strips, blanks and bars for a wide variety of applications. Our ability to maintain tight tolerances in all dimensions presents our customers with unique options. We also tailor make special end cuts upon request. From a simple chamfer on all four corners to full radius and custom designed cuts.
Our Edge Filing machine produces a round, dressed edge for the Spring Trade. Skived edge is produced between .008 and .062 in thickness. Material .375" minimum to 6" maximum width. End product can be cuts to length or recoils in either ribbon or oscillated wound coils.
Clingan can produce oscillate (a.k.a. traverse) coil with up to 10 times the steel on a traditional ribbon wound coil. This enables you to run the equivalent of 10 coils, while only loading one; reducing downtime, coil handling, storage, and scrap. Value and quality make Clingan oscillate coil THE choice of high volume, narrow width strip users.
Another advantage of our edging equipment is the control of camber and twist. These physical distortions are common on narrow slit coil and cut to length strips. Camber control is standard procedure when Clingan slits your narrow width metals. We can also rework your problem material on a toll basis.
Clingan has the capacity to do gauge correction, temper rolling and surface finish improvement. This is possible in both carbon steels & red metals. Gauge reductions up to as much as 15% can be achieved depending on width.
Wth reasonable lead time we can obtain very specific tempers from our custom strip mills.